External Connection Terminal: Removal: Front

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the heater control assembly. Ref. to HVAC SYSTEM (HEATER, VENTILATOR AND A/C)>Control Panel>REMOVAL .
3. Remove the cover assembly - front and the console box assembly. Ref. to EXTERIOR/INTERIOR TRIM>Console Box>REMOVAL .
4. Release the claws, and then remove the panel center LWR.

   Courtesy of SUBARU OF AMERICA, INC.

5. Remove the screws and remove the pocket assembly - CTR.

   Courtesy of SUBARU OF AMERICA, INC.

6. While pressing the claw, press it in from the rear to remove the unit assembly - AUX.

Courtesy of SUBARU OF AMERICA, INC.