Auto Headlight Beam Leveler System: Procedure: Initialization

Check that the indicator in the meter is flashing twice repeatedly with the ignition switch ON.
Turn the ignition switch to OFF.
Install the backup fuse. Ref. to REPAIR CONTENTS>NOTE>BACKUP/POWER SUPPLY FUSE .
Bounce the vehicle several times to normalize the suspension.
Make certain that someone is seated in the driver's seat.
Turn the ignition switch to ON, and within 1.5 to 20 seconds, turn the lighting switch OFF → ON for three successive times.
Make sure that the indicator in the meter flashes three times and then turns OFF, indicating that initialization has been successfully completed. (At this time, the headlight beam drops once, and then returns to the original position.)
Pull out the backup fuse from the fuse holder.
Perform beam adjustment for the headlight. Ref. to LIGHTING SYSTEM>Headlight Assembly>ADJUSTMENT .