Front Fog Light Assembly: Installation

CAUTION:

Install the mud guard - front so that the front end of the mud guard (b) comes outside the bumper face - front (a).

Courtesy of SUBARU OF AMERICA, INC.

Install the fog light assembly - front.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the mud guard - front.
Lower the vehicle.
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Adjust the fog light beam. Ref. to LIGHTING SYSTEM>Front Fog Light Assembly>ADJUSTMENT>FOG LIGHT AIMING .