Outback Model
CAUTION:
Make sure the bolt is tightened securely because improper roof spoiler installation may cause water leakage.
- Install the light assembly - high-mounted.
Tightening torque:
4.5 N.m (0.5 kgf-m, 3.3 ft-lb)
- Install the roof spoiler.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the trim panel - rear gate.
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .