FixVault
Home › Subaru › 2018 › Outback 2.5i › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting System › Light Control Sensor › Removal

Light Control Sensor: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel - front pillar UPR. Ref. to EXTERIOR/INTERIOR TRIM>Upper Inner Trim>REMOVAL .
  3. Release the clips and claws, then detach the grille speaker side. Ref. to ENTERTAINMENT & MONITORING>Front Speaker>REMOVAL>TWEETER .
  4. Remove the sensor - automatic light.
    1. Release the claws of the grille - front defroster.
      CAUTION:
      • Secure minimum space for performing the operation. Do not remove the grille - front defroster. If the grille - front defroster is removed, it cannot be reinstalled unless the instrument panel is removed.
      • Be careful not to damage the sensor and interior trim.
      G10277205Courtesy of SUBARU OF AMERICA, INC.
    2. Release the claws, and then pull out the sensor - automatic light from the grille - front defroster.
    3. Disconnect the connector and remove the sensor - automatic light.
    G10277206Courtesy of SUBARU OF AMERICA, INC.
About FixVault