FixVault
Home › Subaru › 2018 › Outback 2.5i › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Front Inner Remote › Installation

Front Inner Remote: Installation

  1. Before installation, check the following items.
    • Cable is free from deformation such as fray.
    • Grease is applied sufficiently to cable joints.

      If grease is insufficient, add it as necessary before assembling the cable.

    • If the lever is faulty, replace the front inner remote handle.
  2. Install the remote assembly - door.
  3. Install the trim panel - front door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault