Check Hazard Light Operation

CHECK HAZARD LIGHT OPERATION.
Make sure the hazard light blinks when hazard switch is turned to ON.

Does the hazard light blink?

Yes: Go to 2

No: Check the hazard light circuit.
CHECK BODY INTEGRATED UNIT SETTING.
Display the data of «Abnormal warning lamp flashing setting» using Subaru Select Monitor.

NOTE: For detailed operation procedures, refer to "Application help".

Is the setting ON?

Yes: Go to 3

No: Turn the setting to ON.
CHECK DATA MONITOR.
Display the data of «Left turn signal output» and «Right turn signal output» using Subaru Select Monitor.

Is output signal present when operating the transmitter LOCK/UNLOCK button?

Yes: Go to 4

No: Check body integrated unit. Ref. to BODY CONTROL SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
CHECK KEYLESS ENTRY OPERATION.
Press the LOCK/UNLOCK button of the keyless transmitter.

Does it operate properly?

Yes: Replace the body integrated unit. Ref. to SECURITY AND LOCKS>BODY INTEGRATED UNIT .

No: Check keyless entry system. Ref. to SECURITY AND LOCKS>Keyless Entry System>INSPECTION>SYMPTOM CHART .