FixVault
Home › Subaru › 2018 › Outback 2.5i › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Power Window Control Switch › Removal › Sub-Switch › Switch - power window sub rear

Switch - power window sub rear

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the trim panel - rear door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>REMOVAL>REAR DOOR .
  3. Remove the panel - power window sub switch rear.
    CAUTION: Be careful not to damage the trim panel - rear door with the panel - power window sub switch rear.
    1. Insert a sheet of protective paper (a) between panel - power window sub switch rear and trim panel - rear door.
    2. Remove the screws.
      G10272707Courtesy of SUBARU OF AMERICA, INC.
    3. Release the claws, and then remove the panel - power window sub switch rear.
    G10272708Courtesy of SUBARU OF AMERICA, INC.
  4. Release the claws, and then remove the switch - power window sub rear.
G10272709Courtesy of SUBARU OF AMERICA, INC.
About FixVault