FixVault
Home › Subaru › 2018 › Outback 2.5i › Repair and Diagnosis › Brakes › Traction Control › Vehicle Dynamics Control (VDC) System › Hill Hold Switch › Removal

Hill Hold Switch: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover assembly - front. Ref. to EXTERIOR/INTERIOR TRIM>Console Box>REMOVAL .
  3. Release the claws and remove the hill hold switch.
    G10272392Courtesy of SUBARU OF AMERICA, INC.
About FixVault