FixVault
Home › Subaru › 2018 › Outback 2.5i › Repair and Diagnosis › Electrical › Gauges › Instrumentation System & Driver Information Center › Combination Meter › Disassembly

Combination Meter: Disassembly

CAUTION:
  • Use gloves to avoid damage and putting fingerprints on the lens surface and meter surfaces.
  • Be sure not to touch the meter indicator needle.
  • Because LEDs are used for all of warning lights and indicator lights, they are not removable from the meter - main assembly.
  1. Remove the screws, and then remove the outer mask.

    Preparation tool: 

    TORX® T10

    G10272776Courtesy of SUBARU OF AMERICA, INC.
  2. Release the claws and remove the lens.
    G10272777Courtesy of SUBARU OF AMERICA, INC.
About FixVault