Reduction Driven Gear: Assembly

Install the snap ring to reduction driven gear.
NOTE: Use a new reduction driven gear COMPL.
Using the ST, install the parking gear.
ST 499757002 INSTALLER

Courtesy of SUBARU OF AMERICA, INC.
Using the ST, install the transfer drive gear.
ST 499757002 INSTALLER

Courtesy of SUBARU OF AMERICA, INC.
Using the ST, install the ball bearing.
NOTE: Use a new ball bearing.

ST 499277100 BUSHING 1-2 INSTALLER

Courtesy of SUBARU OF AMERICA, INC.
Using the ST, counter the rotation of the reduction driven gear assembly, and install the lock nut.
NOTE: Use a new lock nut.

ST1 18355AA000 PULLEY WRENCH

ST2 18334AA000 PIN SET

ST3 499987003 SOCKET WRENCH (35)

Tightening torque:

95 N.m (9.7 kgf-m, 70.1 ft-lb)

Courtesy of SUBARU OF AMERICA, INC.
Crimp the lock nut at four locations so that the dimension of A becomes 18.9 mm (0.74 in) or less.
CAUTION: Do not allow the lock nut to be cracked during crimping operation.

Courtesy of SUBARU OF AMERICA, INC.