FixVault
Home › Subaru › 2018 › Outback 3.6R Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control/Fuel System (H6DO) › Manifold Absolute Pressure Sensor › Installation

Manifold Absolute Pressure Sensor: Installation

  1. Install the manifold absolute pressure sensor to the intake manifold, and connect the connector to the manifold absolute pressure sensor.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  2. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Install the collector cover.
About FixVault