FixVault
Home › Subaru › 2018 › Outback 3.6R Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control/Fuel System (H6DO) › Oil Temperature Sensor › Installation

Oil Temperature Sensor: Installation

  1. Install the oil temperature sensor to the cylinder block, and connect the connector to the oil temperature sensor.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb)

  2. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Install the collector cover.
About FixVault