FixVault
Home › Subaru › 2018 › Outback 3.6R Limited › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Relay and Fuse › Installation

Relay and Fuse: Installation

  1. Install the steering heater relay.
  2. Install the body integrated unit (fuse & relay box).

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the panel - knee guard.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb)

  4. Install the cover assembly - instrument panel LWR driver.
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault