Front Wheel Speed Sensor: Installation

CAUTION:

Be sure to prevent water or oil from contacting the connector terminal of front wheel speed sensor. If adhesion occurs, replace with a new part.
After installing the front wheel speed sensor, adjust the CVTF level.

Install the front wheel speed sensor.
NOTE:
- Use new O-rings.
- Apply CVTF to the O-rings.
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Connect the harness connector.
Lower the vehicle.
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .