FixVault
Home › Subaru › 2018 › WRX Base › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Front Regulator And Motor Assembly › Removal

Front Regulator And Motor Assembly: Removal

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>BATTERY
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the trim panel - front door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>REMOVAL>FRONT DOOR
  3. Remove the sealing cover - front door. Ref. to EXTERIOR BODY PANELS>Front Sealing Cover>REMOVAL
  4. Remove the glass assembly - front door. Ref. to GLASS/WINDOWS/MIRRORS>Front Door Glass>REMOVAL 
  5. Remove the regulator and motor assembly - front.
    1. Disconnect the motor - front connector.
    2. Remove the bolts, and then remove the regulator and motor assembly - front.
      G10270853
About FixVault