FixVault
Home › Subaru › 2018 › WRX Base › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Rear Regulator And Motor Assembly › Installation

Rear Regulator And Motor Assembly: Installation

  1. Install the regulator and motor assembly rear.

    Tightening Torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the glass assembly - rear door. Ref. to GLASS/WINDOWS/MIRRORS>Rear Door Glass>INSTALLATION 
  3. Install the sealing cover - rear door.
  4. Install the trim panel - rear door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>INSTALLATION
  5. Connect the battery ground terminal. Ref. to NOTE>BATTERY
About FixVault