Cooling System
ENGINE COOLING SYSTEM SPECIFICATION
| Cooling System | Electric Fan + Forced Engine Coolant Circulation System | ||||
| Total Engine Coolant Capacity | L (US qt, Imp qt) | CVT model: Approx. 8.3 (8.8, 7.3) | |||
| MT model: Approx. 8.1 (8.6, 7.2) | |||||
| Water Pump | Type | Centrifugal impeller type | |||
| Discharge performance | Discharge rate | L (US gal, Imp gal)/min | 248 (65.5, 54.6) | ||
| Pump speed - Discharge pressure | 8, 580 r/min - 88 kPa (8.9 mAq) | ||||
| Engine coolant temperature | 80°C (176°F) | ||||
| Impeller diameter | mm (in) | 56 (2.2) | |||
| Number of impeller vanes | 7 | ||||
| Pump pulley diameter | mm (in) | 100 (3.9) | |||
| Thermostat | Type | Wax pellet type | |||
| Starting temperature to open | 86 - 90°C (187 - 194°F) | ||||
| Fully opens | 95°C (203°F) | ||||
| Valve lift | mm (in) | 8.0 (0.315) or more | |||
| Valve opening size | mm (in) | 32 (1.26) | |||
| Radiator Fan | Motor input | Main fan | W | 120 | |
| Sub fan | W | 120 | |||
| Fan diameter/Blade | Main fan | 320 mm (12.6 in)/9 | |||
| Sub fan | 320 mm (12.6 in)/11 | ||||
| Radiator | Type | Down flow, pressure type | |||
| Core dimensions | Width x Height x Thickness | mm (in) | 687.4 x 340 x 16 (27.06 x 13.39 x 0.63) |
||
| Pressure range in which cap valve is open | kPa (kg/cm2 , psi) | Positive pressure side | Standard | 93 - 123 (0.95 - 1.25, 14 - 18) | |
| Limit | 83 (0.85, 12) | ||||
| Negative pressure side | Standard | -1.0 to -4.9 or less (-0.01 --0.05, -0.1 --0.7) |
|||
| Fins | Corrugated fin type | ||||
| Reservoir Tank | Capacity | L (US qt, Imp qt) | 0.45 (0.48, 0.40) | ||