FixVault
Home › Subaru › 2018 › WRX Base › Repair and Diagnosis › Engine Mechanical › Engine Lubrication System (Except For STI) › Oil Level Switch › Removal › When Removing Front CROSSMEMBER

When Removing Front CROSSMEMBER

  1. Remove the front crossmember. Ref. to FRONT SUSPENSION>Front Crossmember>REMOVAL .
  2. Disconnect the oil level switch connector from the engine wiring harness, and remove the clip (A) securing the harness.
    G09476614
  3. Remove clip (A) from the oil pan upper, and remove the oil level switch.
    G09476529
About FixVault