FixVault
Home › Subaru › 2018 › WRX Base › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Injection System (Except For STI) › Electronic Throttle Control Relay › Removal

Electronic Throttle Control Relay: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to NOTE>BATTERY .
  2. Remove the instrument panel lower cover. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the nut and bolt, and move the fuse block downwards.
    G09475594
  4. Remove the electronic throttle control relay from the relay block.
    G09475599
About FixVault