STI Model

Press in a new pilot bearing to the position where it is flush with the flywheel surface or up to 0.4 mm (0.016 in) deeper than that.
CAUTION: Do Not press the bearing inner ring.
Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER
Tighten the flywheel mounting bolts to the specified torque.
NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in a crisscross order.

Tightening Torque:

75 N.m (7.6 kgf-m, 55.3 ft-lb)

Fig 1: Flywheel Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the clutch disc and clutch cover. Ref. to CLUTCH SYSTEM>Clutch Disc and Cover>INSTALLATION
Install the transmission assembly. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT) (TY85)>Manual Transmission Assembly>INSTALLATION