Solenoid Unit
- Remove the AT select lever. Ref. to CONTROL SYSTEMS>Select Lever>REMOVAL
- Remove the spacer and gasket. Ref. to CONTROL SYSTEMS>Select Lever>DISASSEMBLY
- Using a flat tip screwdriver with a thin tip, remove the harness connector.
- Raise the claw with a flat tip screwdriver with a thin tip and remove the solenoid unit.
- Remove the terminal of the solenoid unit using a flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less, KTC connector terminal tool ECC-1T or equivalent.