FixVault
Home › Subaru › 2019 › Ascent Base › Repair and Diagnosis › Body & Frame › Door Locks › Power Rear Gate System › Power Rear Gate Inner Switch › Inspection

Power Rear Gate Inner Switch: Inspection

  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G10309989Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2 Switch OFF 1 MΩ or more
    Switch ON Less than 1 Ω
  2. Replace the power rear gate inner switch, if the inspection result is not within the standard value.
About FixVault