FixVault
Home › Subaru › 2019 › Ascent Base › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Rear Regulator and Motor Assembly › Installation

Rear Regulator and Motor Assembly: Installation

  1. Install the regulator and motor assembly rear.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the glass assembly rear door.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the rear sealing cover.
  4. Install the trim panel rear door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>INSTALLATION .
  5. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>NOTE>BATTERY>GROUND TERMINAL REMOVAL OR INSTALLATION .
About FixVault