CVTF Cooler (With Warmer Function): Inspection

If any malfunction is found in water hose (inlet) and water hose (outlet), CVTF cooler inlet hose and CVTF cooler outlet hose, CVTF cooler pipe and clamps in the inspection below, replace them.

1. Check that there are no CVTF or engine coolant leaks from the connections.
2. Check the clamp for deformation.
3. Lightly bend the hoses and check for cracks in the surface or other damages.
4. Pinch the hoses with your fingers and check for poor elasticity. Also check for poor elasticity in the parts where the clamp was installed by pressing with your fingernail.
5. Check for peeling, cracks, and deformation at the tip of the hose.
6. Check the CVTF cooler (with warmer feature) for any damage.