FixVault
Home › Subaru › 2019 › Ascent Limited › Repair and Diagnosis › Body & Frame › Door Locks › Power Rear Gate System › Memory Height Switch › Removal

Memory Height Switch: Removal

  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>SAFETY .
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the memory height switch.
    1. Release the claws and remove the memory height switch (c).
    G12401637Courtesy of SUBARU OF AMERICA, INC.
About FixVault