Child Seat Fixing Device (ISO-FIX): Installation
NOTE:
The procedures described below are for the RH side. Perform the same procedures for the LH side.
- Installation of the rear seat hinge RH
- Install the rear seat hinge RH with 3 bolts.
Standard value: T=33N.m {337kgf.cm} {24.3ft.lbf}
- Install the rear seat hinge RH with 3 bolts.
- Installation of the quarter lower trim RH (Refer to INSTALLATION , Step 16 )
- Installation of the front door opening trim weather strip RH (Refer to INSTALLATION , Step 28 )
- Installation of the front door scuff plate RH (Refer to INSTALLATION , Step 26 )
- Installation of the child restraint seat anchor bracket RH
- Install the child restraint seat anchor bracket RH with 2 bolts.
Standard value: T=25N.m {255kgf.cm} {18.4ft.lbf}
- Install the child restraint seat anchor bracket RH with 2 bolts.
- Installation of the bench type rear seat backrest ASSY (Refer to INSTALLATION )
- Installation of separate type rear seat cushion ASSY (Refer to INSTALLATION )