FixVault
Home › Subaru › 2019 › BRZ Series.Gray › Repair and Diagnosis › External Pages › Different variant/trim › Section 2 (Automatic Transaxle (Service Information)) › Speed Sensor › Removal

Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Removal of under cover front AL (refer to REMOVAL )
  2. Removal of under cover COMPL T/M (refer to REMOVAL )
  3. Removal of transmission revolution sensor (NT)
    1. Disconnect the connector.
    2. Remove the bolt, and then remove the transmission revolution sensor (NT) and the O-ring.
    G12587432Courtesy of SUBARU OF AMERICA, INC.
  4. Removal of transmission revolution sensor (SP2)
    1. Remove the automatic transmission ASSY. (Refer to REMOVAL )
    2. Disconnect the connector.
    3. Remove the bolt, and then remove the transmission revolution sensor (SP2) and the O-ring.
      G12587433Courtesy of SUBARU OF AMERICA, INC.
About FixVault