Front Disc Brake Assembly: Installation
WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before installation, remove mud and foreign matter from the caliper body and support front disc brake.
- Check each part. Ref. to BRAKE>FRONT DISC BRAKE ASSEMBLY>INSPECTION .
- Install the support front disc brake.
Tightening torque:
142 N.m (14.5 kgf-m, 104.7 ft-lb)
- Install the pad COMPL.
- Install the caliper body.
Tightening torque:
55 N.m (5.6 kgf-m, 40.6 ft-lb)
- Connect the brake hose front using a new gasket.
Tightening torque:
26 N.m (2.7 kgf-m, 19.2 ft-lb)
- Install the pad clip.
- Bleed air from the brake system. Ref. to BRAKE>AIR BLEEDING>PROCEDURE>BRAKE LINE .
- Install the front wheels.
Tightening torque:
120 N.m (12.2 kgf-m, 88.5 ft-lb)