FixVault
Home › Subaru › 2019 › Crosstrek Base, Standard Trans › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Security And Locks › Keyless Entry Control Module › Installation › 5 Door Model

5 Door Model

  1. Install the keyless entry control module.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the trim panel - rear apron LH. (Except for hybrid model) Refer to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION>5 DOOR MODEL (EXCEPT FOR HYBRID) .
  3. Connect the battery ground terminal. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  4. When the keyless entry control module is replaced, register the transmitter ID. (Model with TPMS) Refer to TIRE PRESSURE MONITOR (DIAGNOSTICS)>REGISTER TRANSMITTER (ID)>OPERATION .
About FixVault