Rear ABS Wheel Speed Sensor: Removal

1. Disconnect the ground terminal from battery. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY>GROUND TERMINAL REMOVAL OR INSTALLATION .
2. Lift up the vehicle, and then remove the rear wheels.
3. Remove the rear ABS wheel speed sensor.

CAUTION:

• Be careful not to damage the sensor.
• Do not apply excessive force to the sensor harness.
• Leave the sensor harness clamp on the vehicle side.

1. Disconnect the connector from the rear ABS wheel speed sensor.
2. Remove the harness clamp and bolts, and remove the rear ABS wheel speed sensor from the rear axle housing.

• Impreza model

  Courtesy of SUBARU OF AMERICA, INC.

• Crosstrek model

Courtesy of SUBARU OF AMERICA, INC.