Electrical Specification
WARNING: This page is about a different car, the 2019 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal No. | Content | Measuring condition | Standard |
|---|---|---|---|
| (AB61) No. 1 (+) ↔ Chassis ground (-) | Battery power supply | Always | Battery voltage |
| (AB61) No. 2 | Airbag Control Module communication (+) | - | - |
| (AB61) No. 3 | Airbag Control Module communication (-) | - | - |
| (AB61) No. 4 | - | - | - |
| (AB61) No. 5 | Buckle switch (-) | - | - |
| (AB61) No. 6 | - | - | - |
| (AB61) No. 7 (+) ↔ Chassis ground (-) | Ignition power supply | When ignition switch is ON | Battery voltage |
| (AB61) No. 8 | - | - | - |
| (AB61) No. 9 (+) ↔ Chassis ground (-) | Buckle switch (+) | Buckle not engaged → Buckle engaged | 3.8 - 24 → 3.8 - 16 V |
| (AB61) No. 10 | - | - | - |
| (AB61) No. 11 | - | - | - |
| (AB61) No. 12 | - | - | - |
| (AB69) No. 1 | Load sensor 1 (FL) GND | - | - |
| (AB69) No. 2 | Load sensor 2 (FR) GND | - | - |
| (AB69) No. 3 | Load sensor 3 (RL) GND | - | - |
| (AB69) No. 4 | Load sensor 4 (RR) GND | - | - |
| (AB69) No. 5 | Load sensor 3 (RL) power supply | When ignition switch is ON | 4.9 - 5.1 V |
| (AB69) No. 6 | Load sensor 4 (RR) power supply | When ignition switch is ON | 4.9 - 5.1 V |
| (AB69) No. 7 | Load sensor 1 (FL) signal | - | - |
| (AB69) No. 8 | Load sensor 2 (FR) signal | - | - |
| (AB69) No. 9 | Load sensor 3 (RL) signal | - | - |
| (AB69) No. 10 | Load sensor 4 (RR) signal | - | - |
| (AB69) No. 11 (+) ↔ Chassis ground (-) | Load sensor 1 (FL) power supply | When ignition switch is ON | 4.9 - 5.1 V |
| (AB69) No. 12 (+) ↔ Chassis ground (-) | Load sensor 2 (FR) power supply | When ignition switch is ON | 4.9 - 5.1 V |