Repair Contents: Note: Towing
Avoid towing vehicles except when the vehicle cannot be driven. For models with AWD and CVT (TR580 and TH2A), use a loader instead of towing. When towing other vehicles, pay attention to the following to prevent hook or vehicle damage resulting from excessive weight.
CAUTION:
For continuously variable transmission (TH2A) models, do not tow the vehicle in any other ways than raising four wheels (carrying on a flatbed truck).
- Do not tow other vehicles with a front tie-down hook.
- Make sure the vehicle towing is heavier than the vehicle being towed.
- When towing the vehicle equipped with Subaru EyeSight, be sure to hold down the pre-collision brake OFF switch to turn OFF the pre-collision brake function. (Check that the pre-collision brake OFF indicator light in the meter lights up.)
- Front
Remove the hook cover, and install the towing hook (eyebolt).
CAUTION:
Make sure to detach the towing hook (eyebolt) after towing. If the hook remains attached, airbag may not operate properly when receiving a shock from front side. And it may also affect the crash performance of the vehicle.
Except for hybrid model
Hybrid model
- Rear
Remove the hook cover, and install the towing hook (eyebolt).
CAUTION:
Make sure to detach the towing hook (eyebolt) after towing. If the hook remains attached, the fuel leakage control function of the fuel pump may not operate properly when receiving a shock from rear side. And it may also affect the crash performance of the vehicle.
Except for hybrid model
Hybrid model
- Precautions
| Towing | Precautions | MT | CVT | |
|---|---|---|---|---|
| TR580 | TH2A | |||
| Lifting up four wheels (on a trailer) | Towing the vehicle after lifting up all four wheels is a basic rule for AWD model. | O | O | O |
| Rope |
Driving distance of 31 miles (50 km) or less |
O | Δ | x |
| Raising the front wheels | Prohibited for full-time AWD model. | x | x | x |
| Lifting up the front wheels |
|
x | x | x |
Marked: OK, Marked: Prohibited, Marked: Conditionally OK
CAUTION:
- MT and CVT (TR580) models
- Place the shift lever in "N" position during towing.
- Do not lift up the rear wheels to avoid unsteady rotation.
- Turn the ignition key to "ACC", then check the steering wheel moves freely. (Model without keyless access with push button start)
- Turn the ignition switch to "ACC" or "ON" position, and check that the steering wheel moves freely. (Model with keyless access with push button start)
- Release the parking brake to avoid tire dragging.
- Since the power steering does not work, be careful for the heavy steering effort. (When engine is stopped)
- Since the servo brake does not work, be careful that the brake is not applied effectively. (When engine is stopped)
- In case of the malfunction of internal transmission or drive system, lift up four wheels (on a trailer) for towing.
- Do not use towing hook (eyebolt) except when towing.
- While being towed with all four wheels on the ground, turn the engine switch to ON but do not start the engine.
- If the ignition switch is ON while being towed with a rope, the pedestrian alert system may sound. (This is not a malfunction.)
- CVT (TH2A) model
- Do not lift up the rear wheels to avoid unsteady rotation.
- Do not activate the hybrid system.