Rear Seat Heater Control Module

1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the floor mat side, floor mat center, and box sub trunk assembly.

   Courtesy of SUBARU OF AMERICA, INC.

3. Remove the clips, and remove the cover rear floor edge assembly.

   Courtesy of SUBARU OF AMERICA, INC.

4. Remove the trim panel assembly apron and the trim panel assembly D pillar. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>REMOVAL .
5. Remove the bolt, disconnect the connector and remove the rear seat heater Control Module.

Courtesy of SUBARU OF AMERICA, INC.