Auto Start Stop OFF Switch: Inspection

1. Check that there is no deformation, cracks or other damages.
2. Check the resistance between terminals shown in the following table.

   Courtesy of SUBARU OF AMERICA, INC.

   Terminal No.	Inspection conditions	Standard
   6 - 8	Switch ON	Less than 1 Ω
   	Switch OFF	1 MΩ or more

3. Connect the battery power between the terminals shown in the following table to check the lighting status of illumination.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Condition
1 (+) - 4 (-)	Light ON