Driver Monitoring Unit: Removal

1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the grille ventilation assembly center. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE .
3. Remove the panel center UPR, and remove the audio assembly or navigation assembly. Ref. to ENTERTAINMENT & MONITORING>AUDIO>REMOVAL .
4. Remove the multi-function display. Ref. to INSTRUMENTATION/DRIVER INFO>MULTI-FUNCTION DISPLAY (MFD)>REMOVAL .
5. Remove the driver monitoring unit.

CAUTION: Be careful not to damage the driver monitoring unit.

1. Disconnect the claws and then remove the panel display LWR.

   Courtesy of SUBARU OF AMERICA, INC.

2. Remove the screws and clips to remove the driver monitoring unit.

CAUTION: Do not disconnect the connector on the driver monitoring unit.

Courtesy of SUBARU OF AMERICA, INC.