Check Hazard Light Operation

CHECK HAZARD LIGHT OPERATION .
Make sure the hazard light blinks when hazard switch is turned to ON. Does the hazard light blink?

Yes

Go to 2 .

No

Check the hazard light circuit.
CHECK BODY INTEGRATED UNIT SETTING .
Display the data of «Abnormal warning lamp flashing setting» using Subaru Select Monitor.

NOTE: For detailed operation procedures, refer to "Application help".

Is the setting ON?

Yes

Go to 3 .

No

Turn the setting to ON.
CHECK DATA MONITOR .
Display the data of «Left turn signal output» and «Right turn signal output» using Subaru Select Monitor.

Is output signal present when operating the transmitter LOCK/UNLOCK button?

Yes

Go to 4 .

No

Check body integrated unit. Ref. to BODY CONTROL SYSTEM (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .
CHECK KEYLESS ENTRY OPERATION .
Press the LOCK/UNLOCK button of the keyless transmitter. Does it operate properly?

Yes

Replace the body integrated unit. Ref. to SECURITY AND LOCKS>Body Integrated Unit .

No

Check keyless entry system. Ref. to SECURITY AND LOCKS>Keyless Entry System>INSPECTION>SYMPTOM CHART .