Oil Pressure Switch: Installation

WARNING: This page is about a different variant/trim than selected.

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or equivalent

Courtesy of SUBARU OF AMERICA, INC.
Install the oil pressure switch to the oil pan upper.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Connect the terminal to the oil pressure switch.
Install the undercover. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>INSTALLATION .
Lower the vehicle.
Fill engine oil. Ref. to LUBRICATION (H6DO)>Engine Oil>REPLACEMENT .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .