AT Shift Lock Solenoid and "P" Range Switch: Inspection

Measure the resistance of solenoid unit connector terminals.

Terminals 

No. 4 - No. 3:

Is the resistance 27.6 - 30.5 Ω?

Yes: Go to  2 .

No: Replace the solenoid unit. Ref. to CONTROL SYSTEMS>AT Shift Lock Solenoid and "P" Range Switch .

Connect the battery to the solenoid unit connector terminals, and then operate the solenoid.

Terminals 

No. 3 (+) - No. 4 (-):

Does the solenoid unit operate normally?

Yes: Go to  3 .

No: Replace the solenoid unit. Ref. to CONTROL SYSTEMS>AT Shift Lock Solenoid and "P" Range Switch .

1. Shift the select lever to "P" range.
2. Measure the resistance between "P" range switch connector terminals.

Terminals 

No. 1 - No. 2:

Is the resistance less than 1 Ω?

Yes: Go to  4 .

No: Replace the AT select lever COMPL. Ref. to CONTROL SYSTEMS>Select Lever>REMOVAL .

1. Set the select lever to other than "P" range.
2. Measure the resistance between "P" range switch connector terminals.

Terminals 

No. 1 - No. 2:

Is the resistance 1 MΩ or more?

Yes: Normal

No: Replace the AT select lever COMPL. Ref. to CONTROL SYSTEMS>Select Lever>REMOVAL .