FixVault
Home › Subaru › 2019 › WRX Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Accessory Relay (Push Button Start) › Removal

Accessory Relay (Push Button Start): Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.

    Refer to NOTE>NOTE>BATTERY .

    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the cover assembly - instrument panel LWR driver,

    Refer to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .

  3. Remove the knee airbag module,

    Refer to AIRBAG SYSTEM>KNEE AIRBAG MODULE>REMOVAL

  4. Release the lock and remove the fuse holder.
    G08315475Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the accessory relay (push button start) (A) from the relay and fuse box.
    G09484752Courtesy of SUBARU OF AMERICA, INC.
About FixVault