FixVault
Home › Subaru › 2019 › WRX Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › IG Relay2 (Push Button Start) › Removal

IG Relay2 (Push Button Start): Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.

    Refer to NOTE>NOTE>BATTERY .

    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the cover assembly - instrument panel LWR driver,

    Refer to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .

  3. Remove the knee airbag module,

    Refer to AIRBAG SYSTEM>KNEE AIRBAG MODULE>REMOVAL

  4. Release the lock and remove the fuse holder.
    G08315475Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the relay & fuse box.
    1. Disconnect the connector.
    2. Remove the bolts and nuts, and remove the relay & fuse box.
      G08315115Courtesy of SUBARU OF AMERICA, INC.
  6. Remove IG relay 2 (push button start) (A) from the relay holder.
    G09484750Courtesy of SUBARU OF AMERICA, INC.
About FixVault