FixVault
Home › Subaru › 2019 › WRX Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Impact Sensor › Removal

Impact Sensor: Removal

  1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.
  2. Close all doors and trunk lid.
  3. Press the UNLOCK button of the keyless transmitter or access key.
  4. Disconnect the ground cable from battery.

    Refer to NOTE>NOTE>BATTERY .

    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  5. Remove the impact sensor.
  6. Change the setting of impact sensor using Subaru Select Monitor.
About FixVault