Front Regulator And Motor Assembly: Inspection
- Disconnect the connector of the motor - front.
- Check the motor operation when battery voltage is applied between terminals of the motor - front connector.
- LH side
Terminal No. Inspection conditions Specification 4 (+) - 1 (-) Apply battery voltage between terminals. Increase 1 (+) - 4 (-) Decrease - RH side
Terminal No. Inspection conditions Specification 3 (+) - 6 (-) Apply battery voltage between terminals. Increase 6 (+) - 3 (-) Decrease - LH side
- If it does not operate properly as a result of inspection, replace the regulator and motor assembly - front.