FixVault
Home › Subaru › 2019 › WRX Base › Repair and Diagnosis › Brakes › Traction Control › Vehicle Dynamics Control (VDC) System › Relay And Fuse › Inspection › Check Relay

Check Relay

  1. Measure the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    1 - 2 Always 1 MΩ or more
    G08585558Courtesy of SUBARU OF AMERICA, INC.
    1 - 4 Always Less than 1 Ω
    1 - 2 Apply battery voltage between terminals 3 and 5. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
About FixVault