FixVault
Home › Subaru › 2019 › WRX Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (Except For STI) › High Pressure Fuel Pump › Removal › High-Pressure Fuel Pump

High-Pressure Fuel Pump

CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground terminal from battery sensor. Refer to NOTE>NOTE>BATTERY .
  2. Remove the high-pressure fuel delivery pipes. Refer to FUEL INJECTION (FUEL SYSTEMS) (EXCEPT FOR STI)>HIGH PRESSURE FUEL DELIVERY PIPE>REMOVAL>HIGH-PRESSURE FUEL DELIVERY PIPE .
  3. Remove the fuel delivery pipe (A) from the high-pressure fuel pump, and disconnect the connector (B) from the high-pressure fuel pump.
    NOTE: Disconnect the quick connector as shown in the figure.
    G13258440Courtesy of SUBARU OF AMERICA, INC.
    G09479699Courtesy of SUBARU OF AMERICA, INC.
  4. Using TORX PLUS® bit 40IP, remove the high-pressure fuel pump.
    G09479700Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the fuel pump lifter from the fuel pump case.
    G09479701Courtesy of SUBARU OF AMERICA, INC.
About FixVault