FixVault
Home › Subaru › 2019 › WRX Limited, Automatic CVT Trans › Repair and Diagnosis › Transmission › Automatic Trans › CVT Transaxle › Drive Plate › Removal

Drive Plate: Removal

  1. Remove the transmission assembly from the vehicle. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>AUTOMATIC TRANSMISSION ASSEMBLY>REMOVAL .
  2. Set the ST.
    NOTE: Set the ST to the drive plate referring to the illustration.
    ST 498497300 CRANKSHAFT STOPPER
    G09482058Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the drive plate and reinforcement drive plate.
About FixVault