FixVault
Home › Subaru › 2019 › WRX Limited, Automatic CVT Trans › Repair and Diagnosis › Transmission › Automatic Trans › CVT Transaxle › Forward Clutch Assembly › Installation

Forward Clutch Assembly: Installation

  1. Select a washer. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>FORWARD CLUTCH ASSEMBLY>ADJUSTMENT .
  2. Install the selected washer.
    G06654568Courtesy of SUBARU OF AMERICA, INC.
  3. Install the forward clutch assembly.
    G06654567Courtesy of SUBARU OF AMERICA, INC.
  4. Install the thrust needle bearing.
    NOTE: Install the thrust needle bearing in the correct direction.
    G06654571Courtesy of SUBARU OF AMERICA, INC.
  5. Install the intermediate case. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>INTERMEDIATE CASE>INSTALLATION .
  6. Install the transfer reduction driven gear assembly. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSFER REDUCTION DRIVEN GEAR>INSTALLATION .
  7. Install the center differential carrier. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>CENTER DIFFERENTIAL CARRIER>INSTALLATION .
  8. Install the transfer clutch assembly. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSFER CLUTCH>INSTALLATION .
  9. Install the rear drive shaft. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>REAR DRIVE SHAFT>INSTALLATION .
  10. Install the extension case. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>EXTENSION CASE>INSTALLATION .
  11. Install the transmission to vehicle. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>AUTOMATIC TRANSMISSION ASSEMBLY>INSTALLATION .
About FixVault