FixVault
Home › Subaru › 2019 › WRX Limited, Automatic CVT Trans › Repair and Diagnosis › Transmission › Automatic Trans › CVT Transaxle › Reduction Driven Gear › Assembly

Reduction Driven Gear: Assembly

  1. Using the ST, install the ball bearing to bearing retainer.
    ST 398177700 INSTALLER
    NOTE:
    • Use a new ball bearing.
    • Make sure to install the ball bearing in the right direction.
    • Apply CVTF to the press-fitting area.
    G06654613Courtesy of SUBARU OF AMERICA, INC.
  2. Install the snap ring.
  3. Using the ST, install the reduction driven gear.
    ST 499277200 INSTALLER
    G06654614Courtesy of SUBARU OF AMERICA, INC.
About FixVault