FixVault
Home › Subaru › 2019 › WRX Limited, Automatic CVT Trans › Repair and Diagnosis › Transmission › Automatic Trans › CVT Transaxle › Secondary Speed Sensor › Removal

Secondary Speed Sensor: Removal

CAUTION: Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.
  1. Remove the transmission from the vehicle. Refer to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>AUTOMATIC TRANSMISSION ASSEMBLY>REMOVAL .
  2. Remove the transmission cover on the transmission upper side.
    G10268148Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the secondary speed sensor harness connector.
  4. Remove the secondary speed sensor.
    G09482003Courtesy of SUBARU OF AMERICA, INC.
About FixVault