Camshaft Position Sensor: Removal: Intake

• RH SIDE. 
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>REMOVAL .
  3. Disconnect the connector (A) and remove the camshaft position sensor.

  Courtesy of SUBARU OF AMERICA, INC.

• LH SIDE. 
  1. Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector (A) and remove the camshaft position sensor.

Courtesy of SUBARU OF AMERICA, INC.